Dixell technology is leading the way in electronic regulation and control in the fields of refrigeration, air conditioning and heating, and retail. Dedication to. Dixell. Installing and Operating Instructions rel /02/ – cod. or faulty operation send the instrument back to the distributor or to “Dixell s.r.l.” (see. Digital controllers suitable for both heating and cooling applications. • Built in RS for connection to Dixell’s monitoring system. • Temperature control can be .
||6 February 2005
|PDF File Size:
|ePub File Size:
||Free* [*Free Regsitration Required]
Allows or prevents muting of the alarm buzzer and alarm relay.
Parameter Fnd fan delay now becomes the delay between the start of the 1st and 2nd compressor. If the existing sensors are incompatible or possibly faulty, they can be replaced by the two new PTC sensors which xr100c supplied with the Universal-R.
Defines how the evaporator fan relay operates. Sets the dixle delay between a temperature or pressure alarm condition being sensed and the alarm being signaled during normal operation. Sets the lowest temperature to which the customer can adjust Set Point Sets the highest temperature to which the customer can adjust Set Point Sets the high temperature alarm level.
Setting time to 0 to disables this function Sets the period of time following a thermostat override after which the controller will go into defrost. XRC only Allows or prevents muting of the alarm buzzer and alarm relay. During the energy saving vixel, the temperature display will flash.
They can work with a 4 to 20 mA input from a pressure transducer or an input from a PTC temperature probe. H it H 30 mins. See page 33 for further details. Innovation and efficiency for a better environment Dixell technology is leading the way in electronic regulation and control in the fields of refrigeration, air conditioning and dixwl, and retail.
Pr1 -1c Pr1 -1 c Pr2 Min.
To insure all changes are updated without delay, turn the xf100c off, then on again. Any alteration that have been made will be stored. Sets the low temperature or pressure alarm level.
Sets the time delay between the power to the controller being turned on and any output relay starting to operate.
98473 – Digital Thermometer XR100C 230V
Tells the controller how many stages it is controlling. Sets the current day.
The earth connection must be made otherwise the filter will not function. Setting time to 0 to disables this function Sets the period of time following a thermostat override after which the controller will go into a defrost.
Digital Thermometer XRC V – Thermometer
It’s a community-based project which helps to repair anything. Sensor interference and extension of probe cables It is important to avoid running probe cables close to power cables or other electrical equipment and cables that carry or switch heavy loads. The digital input can be activated by either opening or closing the circuit. This gives a display resolution of either 1 degree or 0. Push SET for 4 secs.
The complete range of Dixell Controllers is extremely large, so only the popular models are covered xxr100c.
Pr2 Pr2 Pr2 1 0 0 Note: These industrial and commercial products play an important role in ensuring human comfort and protecting food throughout the cold chain. Click the X to close this notice. This parameter is not in controllers with PTC probe input Configures output Relay to inverse or direct action. Use them in conjunction with the parameter list for a particular model Note: DIXL Inductive coils as fitted, for example, to solenoid valves or contactors can produce a back EMF which can interfere with the sixel.
Pr2 doxel 0 to mins. Adjusts the off — set of the evaporator probe Turns the decimal point on or off.